Technical Information

\[ V = \frac{\pi\cdot D\cdot N}{1000} \]

V:Cutting speed (Peripheral speed), m/min
D:Outer diameter of saw blade , mm
N:Rotational Speed of saw blade, min^-1
π: pi [3.14]

\[ Fz = \frac{F\cdot 1000}{N\cdot Z} \]

Fz: Chip load, mm/tooth
F: Feed speed, m/mim
N: Rotational Speed of saw blade, min^-1
Z: Number of teeth

The table below indicates the maximum allowable RPM based on the saw blade’s outer diameter and body thickness.

		Outer Diameter of Saw Blade (mm)
		205	255	305	355	405	455	500	550	600	650
Body Thickness (mm)	0.8	5500	4000	3100
	1.0	6900
	1.2	8300	4800	3700	2600	2100
	1.4	9700	5700	4400	3100	2500
	1.6	11100	6500	5000	3500	2800	2200	1800
	1.8	12500	7300	5600	4000	3200	2500	2000
	2.0	13900	8100	6300	4400	3600	2700	2200	1900	1700
	2.2		8900	6900	4900	3900	3000	2400
	2.4		9900	7500	5300	4300	3300	2700	2100	1900	1700
	2.6			8200	5800	4600	3600	2900	2300	2000
	2.8			8800	6200	5000	3900	3100	2500	2200	1800
	3.0				6700	5400	4100	3400	2600	2400	1900
	3.2					5700	4400	3600	2800	2500	2100
	3.4						4700	3800	3000	2700	2200
	3.6							4000	3200	2800	2300
	3.8								3400	3000	2400
	4.0									3200	2600
	4.2										2700
	4.4										2800

The maximum RPM values are determined assuming a standard flange diameter. Please contact us when using non-standard flanges.